How to install the XT60 cable

Preparation tools

Before installing the electric vehicle XT60 cable, we need to prepare some tools: soldering iron, handle, screwdriver, ordinary screwdriver, ordinary tape, scissors, etc.

Prepare materials

After preparing the tools, we next need to prepare materials: XT60 battery output cable, nylon sleeve, tape, screws (if the original screws cannot meet the needs), etc.

Installation process

1. Disassembly

We need to remove the original battery output cable of the car. Use the handle and screwdriver to remove the screws on the battery, and then remove the battery output cable.

2. Installation

Secondly, we need to install the new XT60 battery cable. Insert the electric vehicle XT60 cable into the car battery and secure it with screws. During installation, you can place nylon sleeves, glue and other materials between the battery output wire connector and the battery to prevent the connector from being corroded by salt water and other substances.

3. Wiring

Then, we need to insert the XT60 cable into the battery output line first, then use a soldering iron to solder the battery output wire and the connector together, and then use tape to secure the battery output cable and connector.

3. Installation completed

After the installation is completed, the electric vehicle can use the new electric vehicle XT60 battery cable. During the installation process, we should pay attention to safety and avoid burning the skin and damaging the car, as well as not littering, etc. to avoid damaging the environment.