The production process of braided silicone wire

Braided silicone wire is suitable for fixed laying of power transmission lines or mobile electrical connection cables with AC voltage of 1KV and below. It has the characteristics of heat-resistant radiation, cold resistance, acid and alkali resistance, gas resistance and waterproof. The cable structure is soft and easy to radiate. In the high temperature (alpine) environment, the electrical performance is stable, the aging resistance is outstanding, and the service life is long; it is widely used in metallurgy, electric power, petrochemical, electronics, automobile manufacturing and other industries. Let's take a look at the production process of braided silicone wire.

1. Inspection of the production line. Check the production line before production. Only when the production line is guaranteed to operate normally and there is no problem in any aspect, can a qualified braided silicone wire be produced, preventing production line problems from causing unqualified products and causing great losses to the enterprise.

2. Protective treatment. This work has a big impact on braided silicone wire as there will inevitably be signs of dust during production, but don't ignore or take any action. Not only will it affect the future production process, but also the conductivity of the braided silicone wire. If there is a lot of dust, there will be electrostatic reactions in the production workshop, and the loss caused is immeasurable.

3. ensure the thickness of the braided silicone wire. If it is too thick, more material may be consumed, and the thickness will also affect the high temperature resistance of the braided silicone wire, thereby reducing the resistance result of the braided silicone wire. Therefore, proper thickness is an indispensable detail in the production of braided Silicone Wires.